iBar 15™

iBar 15™は、1000mmの筐体に15個のLED素子(RGBW)が等間隔に配置されているリニアストリップ灯体です。擬似18ビット調光(L3™)で、RGBの分光やグレーシャドウのない光を実現します。






◦Light source type: 15x 15W RGBW LED multichips
◦LED life expectancy: min. 60 000 hours
◦Typical lumen maintenance: L70/B50 @ 50.000 hours
◦LED colour variants: RGBW

Optical system


◦Beam angle: 7.5° (without diffuser), diffuser 35°x70° included as standard
◦Optional diffusers: 32°, 50°, 10°x30°, 30°x10°, 70°x35°
◦Fixture total lumen output:
     ・6.280 lm (integrating sphere)
     ・5.041 lm (goniophotometer)
◦Brightness: 5920 lx @ 5m

Dynamic Effects and Features


◦Variable CTO: 0-100%
◦Virtual Colour Wheel: With 237 colours including whites (2.700 K, 3.200 K, 4.200 K, 5.600 K and 8.000 K)
◦Tungsten lamp effect at whites: 2.700 K and 3.200 K (red shift and thermal delay during dimming)
◦Colour rainbow effect with variable speed
◦Pre-programmed pixel effects with colour, dimming and strobe chases, waves and pulses at variable speed and direction
◦Strobe effect: variable speed (max. 20 flashes per second)
◦Pre-programmed random strobe & pulse effects
◦High resolution electronic dimming: 0-100%
◦L3™ – (Low Light Linearity) Imperceptible 18 bit dimming for ultra smooth fade to black

Control and programming


◦Setting & Addressing: 4-segment LED display & 4 control buttons, stand-alone operation with 1 editable program up to 35 steps)
◦Protocols: USITT DMX-512, RDM
◦Wireless CRMX™ technology from Lumen Radio – on request
◦DMX Protocol modes: 4 including SunStrip emulation mode (Halogen Strip)
◦Control channels: 16, 11, 61, 76
◦Colour mixing: RGBW or CMY
◦Manual control of all effects via control panel

Thermal specification


◦Maximum ambient temperature: 40°C (104°F)
◦Maximum surface temperature: 80°C (176°F)

Electrical specification and connections


◦Power supply: Electronic auto-ranging
◦Input voltage range: 100-240 V, 50/60 Hz
◦Power consumption: max. 170 W
◦DMX and RDM data in/out: DMX outdoor cables CA-0611 (300mm) + NC5MX-HD/NC5FX-HD (5-pin connectors)
◦Power in/out connector: Neutrik powerCON TRUE1 in/out

Mechanical specification


◦Height: 182 mm (7.2″)
◦Width: 997 mm (39.3″)
◦Depth: 180 mm (7.1″)
◦Weight: 11.1 kg (24.5 lbs)
◦LED module “tilt” adjustment range: -100/+45°
◦Ingress protection rating: IP65



◦2x Omega adaptors with 1/4-turn quick locks

Included items


◦User Manual
◦Omega Adaptor CL-regular 2 pcs: 10980033
◦Diffusion filter: 35° x 70° 10980247
◦Cap for XLR connector: 19020175

Optional accessories


◦Diffusion filter:
     ・35° x 70° 10980247
     ・10° x 30° 10980248
     ・70° x 35° 10980249
     ・30° x 10° 10980250
     ・50° 10980251
     ・32° 10980252
     ・Cyc Light kit 10980422
◦Gel Frame set: 10980269
◦Barndoor: 10980421
◦Slim Mounting Brackets for iBar15, 2pcs: 10980625
◦Doughty Trigger Clamp: 17030386
◦Safety wire 36 kg: 99011963
◦Mains Cable powerCON TRUE1 In/Schuko, 2m, Indoor: 13052405
◦Mains Cable powerCON TRUE1 In/US, 2m, Indoor: 13052406
◦Daisy Chain powerCON TRUE1 In/Out, EU, 2m, Indoor: 13052439
◦Mains Cable powerCON TRUE1 In/CEE 16A, 2m, Indoor: 13052445
◦Mains Cable powerCON TRUE1 In/Open ended, 2m, Indoor: 13052407
◦Mains Cable powerCON TRUE1 In/open ended, 2m EU, outdoor: 13052276
◦Mains Cable powerCON TRUE1 In/open ended, 2m US, outdoor: 13052277
◦Daisy Chain powerCON TRUE1 In/Out, US, 2m, Outdoor: 13052280
◦Daisy Chain powerCON TRUE1 In/Out, EU, 2m, Outdoor: 13052281
◦Daisy Chain powerCON TRUE1 In/Out, US, 2m, Indoor: 13052440
◦Daisy Chain powerCON TRUE1 In/Out, EU, 5m, Indoor: 13052444
◦Daisy Chain powerCON TRUE1 In/Out, EU, 0,75m, Outdoor: 13052278
◦Daisy Chain powerCON TRUE1 In/Out, US, 0,75m, Outdoor: 13052279
◦Single Top Loader Case: 10120184
◦Quad Top Loader Case: 10120185