Source
◦Light source type: TE™ 1.000W iSE HP White LED Engine (Patented)
HP – High Performance Engine for maximum light output and optimal colour characteristics
・LED Engine output: 82.000 lm
・Fixture total lumen output:
・50.000 lm (integrating sphere)
・40.000 lm (goniophotometer)
・Colour temperature output: 6.700 K
・CRI: 70, remotely selectable filters for CRI 80 and CRI 90
・Illuminance: 113.000 lx @ 5 m
◦Light source type: TE™ 1.000W iSE HCF White LED Engine (Patented)
HCF – High Colour Fidelity Engine for the best light quality and colour reproduction
・LED Engine output: 55.000 lm
・Fixture total lumen output:
・35.000 lm (integrating sphere)
・28.000 lm (goniophotometer)
・Colour temperature output: 6.000K
・CRI: 96, TLCI: 97, TM-30-18 Rf: 92, TM-30-18 Rg: 99
・Illuminance: 78.000 lx @ 5 m
◦LED life expectancy: min. 50.000 hours
◦Typical lumen maintenance: L70/B50 @ 50.000 hours |
Optical system
◦Robe’s proprietary optical design
◦High-efficiency 13-lens zoom optical system, ratio: 11:1
◦Zoom range: 5° – 55°
◦Output lens diameter: 180 mm
◦parCoat™ (particle resistant coating) unique hydrophobic and oleophobic coating
helps prevent water, dirt, dust, haze and smoke from sticking to the output lens
|
Dynamic Effects and Features
◦Cyan: 0 – 100%
◦Magenta: 0 – 100%
◦Yellow: 0 – 100%
◦Variable CTO: 3.000K – 6.700K
◦Colour Wheel 1: 5 fixed dichroic colours+ white
◦Colour Wheel 2: 5 fixed dichroic colours + white
◦Framing shutters: Patented Plano4™ framing shutters module with 4 individually
LED life expectancy: minpositionable blades plus rotation of the complete
frame system + – 60°
◦Rotating gobo wheel 1: 6 rotating, indexable and replaceable breakup and aerial
gobos + open, patented slot & lock system
◦Rotating gobo wheel 2: 6 rotating, indexable and replaceable breakup and aerial
gobos + open, patented slot & lock system
◦Animation wheel: Aluminium animation wheel, used alone or in combination with gobos,
rotating in both directions at variable speed
◦MLP™ – Patented Multi-Level Prisms allow multiple prisms to be “stacked” while retaining
individual speed and direction control. With variable shape and size it creates unlimited
dynamic, multi-level flower and beam effects:
・Prism 1: Independent 6 facet linear prism rotating in both directions at variable speed
・Prism 2: Independent 6 facet circular prism rotating in both directions at
variable speed
◦Frosts: MagFrost™ – magnetic paddle fast change system providing exchangeable frosts
containing as standard a very light 1° for instant softening of the projected gobo or
framing shutters, and a medium 5° for even wash, both specifically selected for
theatre and TV use
◦Hot-Spot: From flat field to 6:1 hot-spot (optional)
◦Iris: Motorized, stepless, pulse effects up to 3 Hz
◦Motorized zoom and focus
◦Electronic strobe effect with variable speed up to 20 Hz, pre-programmed random strobe
& pulse effects
◦High resolution electronic dimming: 0 – 100%
◦L3™ – (Low Light Linearity) Imperceptible 18 bit dimming for ultra smooth fade to black
◦Extremely quiet operation suitable for all types of production in Theatre and TV
◦Cpulse™ special flicker-free management for HD and UHD cameras, ready for 8K and 16K
◦AirLOC™ (Less Optical Cleaning) technology greatly reduces the level of airborne
particles drawn over the optical elements. This increases the overall performance,
light quality and time between routine cleaning and maintenance. |
Control and programming
◦Setting & Addressing: ROBE Navigation System 2 (RNS2)
◦Display: QVGA Robe touch screen with battery backup, gravitation sensor for auto screen
positioning, operation memory service log with RTC, stand-alone operation with
3 editable programs (each up to 100 steps), built-in analyser for easy fault finding,
NFC app controller
◦Protocols: USITT DMX-512, RDM, ArtNet, MA Net, MA Net2, sACN
◦REAP™ – Robe Ethernet Access Portal
◦Wireless CRMX™ technology from Lumen Radio
◦Epass™: Ethernet pass through switch which sustains Ethernet integrity, when the fixture
has no power, to automatically maintain network connectivity
◦RAINS™ (Robe Automatic Ingress Neutralization System) manages humidity, temperature
and pressure control using an active monitoring system to automatically remove
any moisture detected within the fixture and provides constant monitoring to
ensure peak performance
◦DMX Protocol modes: 1
◦Control channels: 54
◦Pan & Tilt resolution: 16 bit
◦CMY & CTO: 8 bit
◦Colour wheel positioning: 16 bit
◦Framing shutters module movement & rotation: 8 bit
◦Rotating gobo wheel positioning: 8 bit
◦Gobo indexing & rotation: 16 bit
◦Animation wheel: 8 bit
◦Animation wheel rotation: 8 bit
◦Iris: 16 bit
◦Frost: 8 bit
◦Zoom: 16 bit
◦Focus: 16 bit
◦Dimmer: 16 bit (internal 18 bit) |
Movement
◦Pan movement: 540°
◦Tilt movement: 270°
◦Movement control: Standard and Speed
◦Controllable speed of Pan & Tilt movement
◦EMS™: Electronic Motion Stabilizer system for Pan & Tilt reducing beam deviation caused
by truss movement or vibration (Patented)
◦Automatic Pan & Tilt position correction
◦MAPS™ – Motionless absolute positioning system for Pan & Tilt (Patented) |
Rotating gobos
◦12x fully rotating, indexable glass gobos on two wheels
◦Outside diameter: 30.8 mm
◦Image diameter: 25.0 mm
◦Thickness: 1.1 mm
◦Max. thickness: 3.5 mm
◦High temperature borofloat or better glass
◦Patented slot & lock system for easy replacement of gobos |
Effect wheel
◦Single animation wheel
◦Material: Aluminium
◦Diameter: 112 mm
◦Can be used alone or in combination with rotating gobos
◦Rotating in both directions at variable speed |
Framing shutters system
◦Patented Plano4™ framing shutters module
◦Shutters: 4 Blades, each with separate movement and +- 25° rotation control
◦Movement: Smooth with variable speed, ultra-fast for creating mid-air effects
◦Rotation: +- 60° of the complete framing system |
Thermal specification
◦Maximum ambient temperature: 45°C (113°F)
◦Maximum surface temperature: 100°C (212°F)
◦Minimum operating temperature: -20°C (-4°F) |
Electrical specification and connections
◦Power supply: Electronic auto-ranging
◦Input voltage range: 100-240 V, 50/60 Hz
◦Power consumption: max. 1250 W
◦Power connector in: IP65 Neutrik powerCON TRUE1
◦DMX and RDM data in/out: IP65 Locking 3-pin & 5-pin XLR connectors
◦Ethernet port in: IP65 RJ45 connector
◦Ethernet port in/out: RJ45, for Embedded Epass™ switch 10/100 Mbps |
