PATT 2017™

PATT 2017は、レトロスタイルの照明「PATT」シリーズをLED仕様に拡張した灯体です。








◦Light source type: 7x 40W RGBW multichips
◦LED life expectancy: min. 50.000 hours
◦Typical lumen maintenance: L70/B50 @ 50.000 hours

Optical system


◦550mm parabolic aluminium reflector with high reflectivity coating
◦Diffusor dome distributing light evenly from RGBW LED source inside of the reflector

Dynamic Effects and Features


◦Colour mixing mode RGBW or CMY
◦Individual control of each RGBW pixel
◦Variable CTO: 2.700K – 8.000K
◦Virtual Colour Wheel: with 66 preset swatches
◦Pre-programmed pixel effects with colour, dimming and strobe chases, waves and pulses at variable speed and direction
◦Shutter: Electronic with variable speed strobe (max. 20 flashes per second)
◦Pre-programmed random strobe & pulse effects
◦High resolution electronic dimming: 0 – 100%

Control and programming


◦PATT Driver: external
◦Setting & Addressing: two-row LCD display & 4 control buttons
◦Protocols: USITT DMX-512, RDM, ArtNet, Kling-Net, sACN
◦Wireless CRMX™ technology from Lumen Radio – on request
◦DMX Protocol modes: 6
◦Control channels: 13, 32, 40, 47, 53, 60
◦RGBW or CMY: 8 or 16 bit (internal 18 bit)
◦Dimmer: 8 or 16 bit (internal 18 bit)

Thermal specification


◦Maximum ambient temperature: 45 °C (113 °F)
◦Maximum surface temperature: 65 °C (149 °F)
◦Minimum operating temperature: -5 °C (23 °F)

Electrical specification and connections


◦PATT Driver:
     ・Power supply: Electronic auto-ranging
     ・Input voltage range: 100 – 277 V, 50/60 Hz
     ・Power consumption: 240 W
     ・Power in/out connector: Neutrik powerCON TRUE1 in/out
     ・DMX and RDM data in/out: Locking 3-pin & 5-pin XLR
     ・Embeded Ethernet switch 10/100 Mbps: 1x IN/1x Out
     ・Ethernet port in/out: RJ45
     ・Power and Data out: Locking 4-pin XLR (from PATT Driver to the pixelPATT)
     ・Power and Data in: Locking 4-pin XLR

Mechanical specification


◦PATT Driver:
     ・Height: 358 mm(14.1″)
     ・Width: 82 mm (3.2″)
     ・Depth: 162 mm (6.4″)
     ・Weight: 3.0 kg (6.6 lbs)
     ・Height: 680 mm (26.77”)
     ・Width: 695 mm (27.4”)
     ・Depth: 356 mm (14”)
     ・Weight: 10.3 kg (22.7 lbs)
◦Ingress protection rating: IP20



◦Mounting points:
     ・Driver: 1x Half-couple clamp, 1x Safety attachment point
     ・PATT2017: M12 mounting for clamp or spigot
◦Operating position:
     ・PATT Driver: Floor standing on mounted on truss in vertical position
     ・PATT2017: any operating and mounting position

Included items


◦User Manual

Optional accessories


◦PATT Driver:
     ・Standard version 10055002
     ・Wireless version 10055004
◦Floor stand: 10980259
◦Tripod: 10980374
◦Spigot: 10980260
◦Doughty Trigger Clamp: 17030386
◦Safety wire 36 kg: 99011963
◦Mains Cable powerCON TRUE1 In/Schuko, 2m, Indoor: 13052405
◦Mains Cable powerCON TRUE1 In/US, 2m, Indoor: 13052406
◦Mains Cable powerCON TRUE1 In/CEE 16A, 2m, Indoor: 13052445
◦Mains Cable powerCON TRUE1 In/Open ended, 2m, Indoor: 13052407
◦Daisy Chain powerCON TRUE1 In/Out, EU, 2m, Indoor: 13052439
◦Daisy Chain powerCON TRUE1 In/Out, US, 2m, Indoor: 13052440
◦Daisy Chain powerCON TRUE1 In/Out, EU, 5m, Indoor: 13052444
◦Data cable 4-pin XLR 10m, ferite, EU: 13052797
◦Data cable 4-pin XLR 5m, ferite, EU: 13052798
◦Data cable 4-pin XLR 10m, ferite, US: 13052799
◦Data cable 4-pin XLR 5m, ferite, US: 13052800
◦Single Top Loader Case: 10120224
◦Dual Top Loader Case: 10120225