Source
◦Light source type: 9x 40W RGBW LED multichips
◦LED life expectancy: min. 50.000 hours
◦Typical lumen maintenance: L70/B50 @ 50.000 hours |
Optical system
◦Robe’s proprietary optical design
◦Zoom range: 4°- 45°
◦High efficient component optics
◦Fixture total lumen output
・5.300 lm (integrating sphere)
・4.225 lm (goniophotometer) |
Dynamic Effects and Features
◦Colour mixing mode RGBW or CMY
◦Individual control of each RGBW pixel
◦Variable CCT: 2.700K – 8.000K
◦Tungsten lamp effect: 750W, 1.000W, 1.200W, 2.000W, 2.500W lamp emulation for whites from 2.700K to 4.200K (red shift and thermal delay)
◦DataSwatch™ filters: pre-programmed 237 colours and tones including most used whites 2.700K, 3.200K, 4.200K, 5.600K and 8.000K
◦Pre-programmed pixel effects with colour, dimming and strobe chases, waves and pulses at variable speed and direction
◦1x MCFE™ – Multi-Coloured Flower Effects – creating spectacular multicolour beam effects in the air rotating in both directions at variable speed (patented)
◦Motorized zoom
◦Pre-programmed random strobe & pulse effects
◦Electronic strobe effect with variable speed up to 20 Hz
◦High resolution electronic dimming: 0 – 100%
◦L3™ – (Low Light Linearity) Imperceptible 18 bit dimming for ultra smooth fade to black |
Control and programming
◦Setting & Addressing: QVGA Robe touch screen with battery backup, gravitation sensor for auto screen positioning, operation memory service log with RTC, stand-alone operation with 3 editable programs (each up to 88 steps), built-in analyser for easy fault finding
◦Protocols: USITT DMX-512, RDM, Art-Net, MA Net, MA Net2, sACN, Kling-Net
◦REAP™ – Robe Ethernet Access Portal
◦Wireless CRMX™ technology from Lumen Radio – on request
◦DMX Protocol modes: 6
◦Control channels: 25, 45, 59, 68, 72, 81
◦RGBW / CMY: 8 or 16 bit
◦Zoom: 8 or 16 bit
◦Dimmer: 8 or 16 bit (internal 18 bit) |
Movement
◦Tilt movement: 205°
◦16 bit movement resolution
◦Controllable speed of Pan/Tilt movement |
Thermal specification
◦Maximum ambient temperature: 40°C (104°F)
◦Maximum surface temperature: 70°C (158°F)
◦Minimum operating temperature: -5°C (23°F)
◦Total heat dissipation: max. 1023 BTU/h (calculated) |
Electrical specification and connections
◦Power supply: Electronic auto-ranging
◦Input voltage range: 100-240 V, 50/60 Hz
◦Power consumption: max. 300 W
◦Power in/out connector: Neutrik powerCON TRUE1 in/out
◦DMX and RDM data in/out: Locking 5-pin XLR
◦Ethernet port in/out: RJ45
◦Embedded Ethernet switch 10/100 Mbps |
Mechanical specification
◦Height: 279 mm (10.98″) – head in vertical position
◦Width: 508 mm (20”)
◦Depth: 192 mm (7.56″) – head in horizontal position
◦Weight: 11.3 kg (24.9 lbs)
◦Ingress protection rating: IP20 |
Rigging
◦Mounting points: 2 pairs of 1/4-turn locking points
◦2x Omega adaptors with 1/4-turn quick locks
◦Universal operating position
◦Safety cable attachment point |
Included items
◦User Manual
◦Variable Omega Adaptor: 99016241-02 |
Optional accessories
◦Diffusion filter: 2° 10980592
◦Clear lens cover: 10980605
◦Safety wire 36 kg: 99011963
◦Daisy Chain powerCON TRUE1 In/Out, EU, 2m, Indoor: 13052439
◦Daisy Chain powerCON TRUE1 In/Out, US, 2m, Indoor: 13052440
◦Daisy Chain powerCON TRUE1 In/Out, EU, 5m, Indoor: 13052444
◦Single Top Loader Case: 10120261
◦Six Pack Top Loader Case: 10120263
◦Dual Foam Shell: 20020372
◦Omega Adaptor CL-variable 2pcs in box: 10980550 |
