TX1 PosiProfile™

好評をいただいているT1シリーズ,T2シリーズに続き新たにTX1PosiProfileが加わりました。

通常の灯体は、電源を投入の際Pan/Tiltが動作するので設置に
ある程度スペースを必要としていました。
新たにROBE社が開発し特許取得済みの
MAPS™(Motionless Absolute Positioning System)
により、電源投入時にPan/Tiltが動く事無く、初期動作を行うので灯体のPan/Tiltの動作範囲内に
セットなどを組み込む事が可能になります。
その上、TX1PosiProfileには特許取得済みのBARS™(Brake Attribute Retention System)
が搭載され電源を切っても最後のPan/Tiltの位置を保持します。
再度電源を投入する時は、MAPS™によりモーションレスで灯体を立上げられるので灯体間際まで
構造物を入れる事が出来、プログラミングの動作範囲スペースがあれば設置が可能になります。

光源は、MSL-TE™500WマルチスペクトルLEDエンジンを搭載し
Red,Green,Bule,Amber,Lime5色構成を採用し、
ROBE社オリジナルのトランスファラブルエンジン(TE™)
搭載しています。電源を投入の度に白色を調整し他の灯体と色の
バラつきを最小限に抑えるシステムRCC™(Robe Colour Calibration)を標準装備

その他、Plano4™MagFrost™Cpulse™L3™AirLOC™等ROBE社の最新技術が詰まった灯体です。

TX1 PosiProfile™ – Bridging the divide between manual and automated luminaires.

Innovations
         

      

 

 

・MAPS™ (Motionless Absolute Positioning System) &

・BARS™ (Brake Attribute Retention System)

技術仕様

Source

 

◦Light source type: MSL-TE™ 500W LED engine (Patented)
◦Colour temperature: 3.200 K
◦Colour rendition: CRI 95, TLCI 91
◦LED life expectancy: min. 40.000 hours
◦Typical lumen maintenance: L70/B50 @ 40.000 hours

Optical system

 

◦Robe’s proprietary optical design
◦High-efficiency zoom optical system, ratio 9:1
◦Zoom range: 5.5° – 50°
◦Fixture total lumen output:
 ・13.600 lm (integrating sphere)
 ・11.000 lm (goniophotometer)
◦Output lens diameter: 150 mm

Dynamic Effects and Features

 

◦Factory calibrated whites and colours via the new RCC™ (Robe Colour Calibration)
 system, automatic or on-call self-re-calibration of the LED engine without
 the use of any external tool (Patent pending)
◦Colour mixing: CMY/RGB or RGBAL
◦White light: Variable CCT 2.700K – 8.000K
◦DataSwatch™ filters: pre-programmed 237 colours and tones including most used whites
 2.700K, 3.200K, 4.200K, 5.600K and 8.000K
◦Tungsten lamp effect: 750W, 1.000W, 1.200W, 2.000W, 2.500W lamp emulation for
 whites from 2.700K to 4200K (red shift and thermal delay)
◦+ – Green correction function
◦Adjustable CRI from 80 to 95+
◦Framing shutters: Patented Plano4™ framing shutters module with 4 individually
 positionable blades plus rotation of the complete frame system + – 60°
◦Optional drop-in gobo module: Static, rotating gobo wheel and animation wheel
◦Static gobo wheel: 9 static, replaceable breakup gobos + open, all gobos specially
 selected for theatrical and TV productions, patented slot & lock system
◦Rotating gobo wheel: 7 rotating, indexable and replaceable breakup and aerial
 gobos + open, patented slot & lock system
◦Animation wheel: Aluminium animation wheel, used alone or in combination with gobos,
 rotating in both directions at variable speed
◦Iris: Motorized, stepless, pulse effects up to 3 Hz
◦Frosts: MagFrost™ – magnetic paddle fast change system providing exchangeable frosts
 containing as standard a very light 1° for instant softening of the projected
 gobo or framing shutters, and a medium 5° for even wash, both specifically
 selected for theatre and TV use
◦Hot-Spot: from flat field to 6:1 hot-spot (optional)
◦Motorized zoom and focus
◦Electronic strobe effect with variable speed up to 20 Hz: pre-programmed
 random strobe & pulse effects
◦High resolution electronic dimming: 0 – 100%
◦L3™ – (Low Light Linearity) Imperceptible 18 bit dimming for ultra smooth fade to black
◦Extremely quiet operation suitable for all types of production in Theatre and TV
◦Cpulse™ special flicker-free management for HD and UHD cameras, ready for 8K and 16K
◦AirLOC™ (Less Optical Cleaning) technology greatly reduces the level of airborne
 particles drawn over the optical elements. This increases the overall performance, light
 quality and time between routine cleaning and maintenance.
◦BARS™ – Brake Attribute Retention System (Patented) applied for Pan, Tilt, Focus and
 Zoom stepper motors

Control and programming

 

◦Setting & Addressing: ROBE Navigation System 2 (RNS2)
◦Display: QVGA Robe touch screen with battery backup, gravitation sensor for auto screen
 positioning, operation memory service log with RTC, stand-alone operation with
 3 editable programs (each up to 100 steps), built-in analyser for easy fault finding
◦Protocols: USITT DMX-512, RDM, ArtNet, MA Net, MA Net2, sACN
◦REAP™ – Robe Ethernet Access Portal
◦Epass™: Ethernet pass through switch which sustains Ethernet integrity, when the fixture
 has no power, to automatically maintain network connectivity – on request
◦Wireless CRMX™ technology from Lumen Radio – on request
◦DMX Protocol modes: 6
◦Control channels: 40, 27, 44, 48, 33, 52
◦Pan & Tilt resolution: 16 bit
◦Colour mixing: 8 or 16 bit (internal 18 bit)
◦Variable CCT: 8 bit
◦Adjustable CRI: 8 bit
◦+ – Green correction: 8 bit
◦Framing shutters module movement & rotation: 8 bit
◦Rotating gobo wheel positioning: 8 bit
◦Gobo indexing & rotation: 8 or 16 bit
◦Animation wheel: 8 bit
◦Animation wheel rotation: 8 bit
◦Iris: 8 or 16 bit
◦Frost: 8 bit
◦Zoom: 8 or 16 bit
◦Focus: 8 or 16 bit
◦Dimmer: 8 or 16 bit (internal 18 bit)

Movement

 

◦Pan movement: 540°
◦Tilt movement: 280°
◦Movement control: Standard and Speed
◦Automatic Pan & Tilt position correction
◦EMS™: Electronic Motion Stabilizer system for Pan & Tilt reducing beam deviation caused
 by truss movement or vibration (Patented)
◦MAPS™ – Motionless absolute positioning system for Pan & Tilt (Patented)

Rotating gobos

 

◦7x rotating glass gobos
◦Outside diameter: 26.8 mm
◦Image diameter: 23.5 mm
◦Thickness: 1.1 mm
◦Max. thickness: 4 mm
◦High temperature borofloat or better glass

Effect wheel

 

◦Single animation wheel
◦Material: Aluminium
◦Can be used alone or in combination with rotating gobos
◦Rotating in both directions at variable speed

Framing shutters system

 

◦Shutters: 4 Blades, each with separate movement and rotation control
◦Movement: Smooth with variable speed, ultrafast blade movements for creating
 mid-air effects
◦Pre-programmed: Shape and blade sequences
◦Rotation: +- 60° of the complete framing system

Thermal specification

 

◦Maximum ambient temperature: 45°C (113°F)
◦Maximum surface temperature: 75°C (167°F)
◦Minimum operating temperature: -5°C (23°F)

Electrical specification and connections

 

◦Power supply: Electronic auto-ranging
◦Input voltage range: 100-240 V, 50/60 Hz
◦Power consumption: max. 640 W
◦Power connector in: Neutrik powerCON TRUE1
◦DMX and RDM data in/out: Locking 3-pin & 5-pin XLR
◦Ethernet port in/out: RJ45 for Embedded Epass™ switch 10/100 Mbps – on request

Mechanical specification

 

◦Height: 739 mm (29.1″) – Head in vertical position
◦Width: 383.5 mm (15.1″)
◦Depth: 262 mm (10.3″) – Head in vertical position
◦Weight: 24.3 kg (54 lbs)
◦Ingress protection rating: IP20

Rigging

 

◦Mounting positions: 0°, 32°, 90°
◦Universal operating position
◦Mounting points: 5 pairs of 1/4-turn locking points
◦2x Omega adaptors with 1/4-turn quick locks
◦Safety cable attachment point
◦Pan & Tilt transport locks

Included items

 

◦User Manual
◦Omega Adaptor CL-regular 2 pcs
◦Gel frame adaptor: 10980440

Optional accessories

 

◦Gel frame: 10980443 (compatible with standard adaptor 10980440 only)
◦Top hat
◦Frost 0.5° (exchange) assembled: 10980583
◦Frost 1° (exchange) assembled: 10980578
◦Frost 5° (exchange) assembled: 10980573
◦Frost 10° (exchange) assembled: 10980497
◦Frost 20° (exchange) assembled: 10980574
◦Frost 30° (exchange) assembled: 10980584
◦Hot-Spot lens in gobo holder: 10980483
◦Doughty Trigger Clamp: 17030386
◦Omega Adaptor Tall CL – 2 pcs in box: 10980501
◦Safety wire 36 kg: 99011963
◦Single Top Loader Case: 10120290
◦Dual Top Loader Case: 10120291
◦Foam Shell: 20020445